A4 Transfer #1629 | UV DTF or Sublimation
A4 Transfer #1629 | UV DTF or Sublimation
Couldn't load pickup availability
✨ 20% off 5 or more applied at check out!
UV DTF Wrap (no heat needed) or Sublimation Print (heat press required). ✨🤍 Measurements:
16oz Libbey Cup: 9.4 x 4.1 in.
20oz Libbey Cup: 9.4 x 5.0 in.
40oz Top Half Tumbler: 11 x 5.0 in.
🎀 Decals printed by height size.📦 Turn around time for UV DTF is 3-8 business days. PLEASE KNOW TAT DOES NOT INCLUDE SHIPPING, this is just for processing.🫶🏼🫧 HAND WASH ONLY, do not soak. Do not put in dishwasher or microwave.⚠️ No returns, exchanges are accepted. We are not responsible for any transfers that are applied incorrectly.
🪡 Embroidery Merch 🧵
🪡 Embroidery Merch 🧵
✔️ NOTE FOR CREWNECK INFO
- You can find measurement and color charts in the photos included in the listing.
- Adult design is approximately 5 inches & Youth design is approximately 4.5 inches.
✔️ PROCESSING AND SHIPPING TIME
- Processing Time: 1-2 weeks
- Shipping Time: 3-5 business days
✔️ CARE INSTRUCTION
- Wash item inside out in cold water, do not bleach, do not dry clean, do not iron directly on the design.
✔️ IMPORTANT NOTICE
- To cancel an order, contact us immediately as production starts right after an order is placed.
- We do not offer returns or exchanges, but if you have any issues with your order, please reach out!
✨ UV DTF Application Instructions
✨ UV DTF Application Instructions
1. Clean your glass cup (do not use rubbing alcohol).
2. Flip the transfer over and scrape it to ensure the design transfers to the clear film correctly.
3. Place the transfer on the cup ensuring design is straight and positioned correctly. Please remember the adhesive is extremely strong. Once the transfer sticks its almost impossible to remove.
4. Peel design transfer off backing starting from the corner.
5. Press the transfer down, working from the center outwards, pushing out any air bubbles.
6. Once designs is placed, use a squeegee over the entire design to push out any air bubbles.
7. Rub the entire design a few times to ensure everything is adhered correctly.
8. Slowly peel the clear ilm off and you're done!
**For visual instructions search "How to apply UV DTF wraps" on Tiktok or Youtube!**
✨ Sublimation Prints
✨ Sublimation Prints
Each sublimation print is a one time use. Heat Press required. Trim excess white edges of paper as desired before pressing. Sublimation prints appear faded before applied to substrate. Pressing instructions will vary depending on equipment use.
📦 Shipping & Processing
📦 Shipping & Processing
- TAT is 1-3 days for Sublimation and Photo Magnets
- TAT is 3-7 days for Embroidery and UV DTF Prints
Turn around times average 1-7 business days not including weekends. This does not include shipping time.
We are not responsible for lost, stolen, incorrect address or damaged packages. Please contact USPS regarding any issues with shipping.
No returns or exchanges are accepted. We are not responsible for any transfers that are applied incorrectly.
Please refer to application instructions in the descriptions or for visual guides search "how to apply UV DTF wraps" on Youtube or Tiktok.
Thank you! 💕
